Written by Brian Barth; Updated December 14, 2018
Related Articles
- 1 Manually Control an Automatic Sprinkler
- 2 Nelson Sprinklers 6000R Instructions
- 3 Adjust K-Rain Sprinkler Heads
- 4 Nelson Pop-Up Sprinkler Adjustment
Orbit sprinkler valves are designed for automated irrigation systems and are controlled by a computerized timer box. Manual operation is also possible when it is necessary to test the valves after repairs have been made or for sprinkler maintenance checks. Because the normal irrigation cycle may occur when you're not home, manual operation gives you the chance to make sure everything is working smoothly. The valves can be operated manually from the timer box or while standing at the valve.
From the Timer Box
Just replace your old timer with your new B-hyve. And as an added convenience, we provide dual common wires (COM) to make wiring even more simple and organized. Plus your B-hyve Timer comes equipped with corrosion resistant screws, and you can easily secure all of your wires with the included screwdriver.
Turn the dial to the 'Auto' position and press the 'Manual' key to test the valves on Easy Dial and Easy Set Orbit timers. Each valve will be activated in sequence for the duration it is set for. To test a single valve, use the arrow keys to navigate to the desired zone and press the '+/-' keys to set the duration of the test.
Turn the dial to the 'Auto' position and move the slide switch for the desired valve up to the 'Manual On' position to test valves on Orbit's 'Individual Station Slide' timers. To test all the valves in sequence, simply press the 'Manual' key and press 'Enter.'
Check to make sure the selected valves come on as they are activated manually. If a valve does not come on, check the wiring and the solenoid to find the problem.
Press 'Clear' to stop the manual watering cycle at any time, or slide the the switch to the 'Manual Off' position for the 'Individual Station Slide' models. If a valve does not shut off, debris inside of it is likely causing the problem. Unscrew the solenoid and the lid of the valve, remove the internal parts and rinse them off. Reassemble the valve and test it again.
From the Valve
Rotate the solenoid a half turn counterclockwise to activate the valve manually, if it is a model with a lever marked 'on/off' at the base of the solenoid. The solenoid is the cylindrical device on top of the valve. If the solenoid does not have an 'on/off' lever, rotate the bleed screw counterclockwise a half turn to activate the valve. This is a black plastic screw in the top of the valve below the solenoid.
Watch to see which irrigation zone comes on. If nothing happens and water cannot be heard running through the valve, there is a problem with the water supply. Find the master valve that supplies water to all the individual valves and turn it on.
Observe each sprinkler in the zone to see if it sprays in the right direction. To adjust the direction of spray, grasp the extended riser and rotate it to spray where needed. If the spray distance is incorrect, adjust it with the screw on top of the sprinkler head -- clockwise reduces the spray and counterclockwise increases the spray
Tip
For greater flexibility and convenience, use Orbit's remote control timer system. With the touch of a button, the valves can be activated from anywhere in the yard.
References (2)
About the Author
Brian Barth works in the fields of landscape architecture and urban planning and is co-founder of Urban Agriculture, Inc., an Atlanta-based design firm where he is head environmental consultant. He holds a Master's Degree in Environmental Planning and Design from the University of Georgia. His blog, Food for Thought, explores the themes of land use, urban agriculture, and environmental literacy.
6 Station Orbit Sprinkler Manual Downloads
Cite this Article
Choose Citation Style
Barth, Brian. 'How to Manually Test an Orbit Sprinkler Valve.' Home Guides | SF Gate, http://homeguides.sfgate.com/manually-test-orbit-sprinkler-valve-91018.html. 14 December 2018.
Barth, Brian. (2018, December 14). How to Manually Test an Orbit Sprinkler Valve. Home Guides | SF Gate. Retrieved from http://homeguides.sfgate.com/manually-test-orbit-sprinkler-valve-91018.html
Barth, Brian. 'How to Manually Test an Orbit Sprinkler Valve' last modified December 14, 2018. http://homeguides.sfgate.com/manually-test-orbit-sprinkler-valve-91018.html
Note: Depending on which text editor you're pasting into, you might have to add the italics to the site name.
source until after wiring
RESET
RAIN DELAY
OFF
CLOCK
DATE
HOW
RUN
START
PN 57896-50 rE
f 801 951 5815
1065 South 500 West
proof no:2
des:SM
sku:57896
file name:57896-50 rE.indd
colors
· Proofing Code:
·
non printing
????
????
color
PMS
K
Printers are responsible for
requirements. Any changes
client and Fluid Studio.
designated specifications
dimensions:
finished: w 32' d: ' h 14'
work is the property of Fluid
reproduced or distributed
express permission.
1. SELECT LOCATION
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
AUTO
SET
SET
BUDGET
OFTEN
TIME
TIME
For detailed instructions on outdoor wiring, please download the
full manual “Outdoor Swing Panel Timer” at www.orbitonline.com
Warning: Check state and local codes. Orbit recommends using
a licensed electrical contractor for outdoor wiring of timer.
Outdoor
Allow 9 inch clearance for the swing door
F
H
C
E
MANUAL - To water manually
PROGRAM - to switch between
ARROW [ ] - To skip to the next
other programs/settings
previous setting / watering station or
RAIN DELAY - To pause operation
factors
+
[
] - To decrease a numeric setting
I
O
J
L
AUTO - Watering mode
SET DATE - Year, Month, and Day
RUN TIME - Set watering duration for
HOW OFTEN - Set frequency of
BUDGET - Adjust overall watering as
OFF - Turn all stations off
RESET
RAIN DELAY
OFF
CLOCK
DATE
HOW
RUN
START
A
C
D
G
Reset
6 Station Orbit Sprinkler Manual For 27999
Swing
Release
ELECTRICAL POWER
RESET
RAIN DELAY
OFF
CLOCK
DAY
HOW
RUN
START
Outdoor
Warning: See manual for outdoor wiring instructions
TO TERMINAL
Push tab
release wire
Push in
each terminal (station)
Set Current Time
mountain standard)
Turn dial to set clock enter current time (+/-)
B
DATE
Set Start Time
watering
Select Watering Duration
then press enter
Turn dial to run time enter the watering duration (+/- ) for each
station ([ENTER] or [ARROW] to move between stations).
Set Watering Days
Turn dial to how often to select watering days ([ARROWS]
To water on Odd or Even days or to water using Intervals
days, please download the full manual “Outdoor Swing
Panel Timer” (at www.orbitonline.com) for instructions.
F
Turn dial to AUTO—you have programmed your timer!
Pre-formed
No. 8 Screw
1/8'
Level
pre-formed mounting holes.
GABARIT D`INSTALLATION
4.17”
f 801 951 5815
1065 South 500 West
proof no:3
des:SM spck:SM
client:Orbit
upc:? ????? ????? ?
57880-04 rA.indd
colors
·
crop color
PMS
PMS
non printing
????
Registration
Printers are responsible for
requirements. Any changes
client and Fluid Studio.
designated specifi cations
dimensions:
fi nished: w 9' d: 0' h 7'
work is the property of Fluid
reproduced or distributed
express permission.
mark screw locations.
To
Wire Nut
Common Wire
Connect one of the two wires from each valve to the
common wire leading to the timer (usually white).
Connect the other wire from each valve to one of the
3. CONNECT SPRINKLER
6. ACTIVATE BATTERY
PROGRAM
OFF
CLOCK
DATE
HOW
RUN
START
Remove plastic
battery
One Lithium CR2032 battery (included) is required
to retain the program in memory during power loss.
Remove the plastic strip to activate the
Battery
QUICK START GUIDE
Phillips Screwdriver
Note: The quick start guide is intended to help you
get up and running with your new timer. It includes
basic installation and programming help. For more
detailed and advanced instruction, please download
www.orbitonline.com
RAIN DELAY
• Turn dial to AUTO and Press the [RAIN DELAY] button.
• Press [ENTER] to begin.
MANUAL WATERING
Your timer has the ability to allow you to manually water without
To Run all stations at the pre-programed duration
• Press the [MANUAL] button. Display will show A B and ALL.
• Press [ENTER] (or wait a few seconds) to begin manual watering.
All stations will water consecutively for their programmed duration.
• Turn the dial to AUTO.
• Press [ENTER].
• Press the [ / ] buttons until desired station number appears.
• Press [ENTER] (or wait a few seconds) to begin manual watering.
Orbit 57161 Sprinkler System 6-station Manual
Note: After the [MANUAL] button has been pushed, if a selection
is not made within 5 seconds all stations and programs will begin
watering using the programmed RUN TIMES. If no RUN TIMES have
been set, nothing will happen and the display will return to the time
BACKUP BATTERY
Your timer requires a CR2032 Lithium battery to maintain your
Tip: The Battery should be replaced every year, to avoid loss of
Note: A battery alone will not operate the valves in your sprinkling
system. The sprinkler timer transformer must be connected to an
For instructions on “Water Budgeting”, connecting the timer to a
“Pump Start” relay, replacing the “Backup Battery” or for installing
your timer outdoor, please download the full manual “Outdoor
HELP
www.orbitonline.com
Before returning this sprinkler timer to the store, contact Orbit
Technical Service at: 1-800-488-6156, 1-801-299-5555.
The sprinkler timer is tested to UL60730 standard & is ETL
listed.
®
®
This Class B digital apparatus complies with Canadian ICES-003.
Input: 120V, 60Hz, 0.2A; Output: 26V, SOOmA
Pollution degree: 2
The supply cord of this control can be replaced only by the
TRADEMARK NOTICE
®
®
Products, Inc. The information in this manual is primarily intended
for the user who will establish a watering schedule and enter that
schedule into the sprinkler timer. This product is intended to be
used as an automatic sprinkler timer for activating 24 VAC irrigation
WARRANTY AND STATEMENT
®
Irrigation Products, Inc. warrants to its customers that its
products will be free from defects in materials and workmanship
for a period of six years from the date of purchase.
We will replace, free of charge, the defective part or parts found to
be defective under normal use and service for a period of up to six
years after purchase (proof of purchase required).
We reserve the right to inspect the defective part prior to
Orbit
Irrigation Products, Inc. will not be responsible for
consequential or incidental cost or damage caused by the product
®
liability under this warranty is limited solely to the
To exercise your warranty, return the unit to your dealer with a copy
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) This device must accept
any interference received, including interference that may cause
Warning: Changes or modifications to this unit not expressly approved
Orbit Sprinkler Timer Manual
by the party responsible for compliance could void the user’s authority
NOTE: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Caution: This appliance is not intended for use by young children
6 Station Orbit Sprinkler Manual 27896
or infirm persons without supervision. Young children should be
supervised to ensure that they do not play with the appliance.
• Turn dial to SET DATE to enter the Year, Month and Day.
• Press [ENTER] to advance to Month and Day.
• Enter one start time using the (+/-) button.
Note: Additional start times – Additional start times can be
entered if you want your sprinklers to water the same area
multiple times a day. For instructions please download the
6 Station Orbit Sprinkler Manual System
“Outdoor Swing Panel Timer” manual at www.orbitonline.com.
6 Station Orbit Sprinkler Manual Instructions
Summary of content (2 pages)